|
TruLaser Series 7000
TruLaser 7025 – TruLaser 7040
The idea behind this machine is at the same time simple and genial: Highest productivity through linear drive technology coupled with two CO2 lasers and two laser cutting heads. TruLaser 7025 with two CO2-lasers
High volume production of parts in thin sheetmetal and a highg accuracy are the strengths of these machines. The available laser power of course also allows processing of thicker sheets as well.
An automatic pallet changer feeds the sheets to the machine on pallets. To facilitate part removal parallel to production, the pallet is accessible from three sides.
| Application |
Laser cutting at high speed |
| Category |
Laser Cutting Machine |
| Working range |
TruLaser 7025: 2500 mm x 1250 mm
TruLaser 7040: 2500 mm x 4000 mm
|
| Laser |
TruFlow 3200, TruFlow 3600 |
| Sheet thickness |
20 mm (mild steel)
15 mm (stainless steel)
10 mm (aluminium) |
| Automation |
Possible for everything from simple
loading equipment to complex storage connection |
Application areas
The TruLaser Series 7000 is designed for use wherever job orders can be filled faster and more economically with two cutting heads. Cost savings can be achieved especially in the fabrication of medium to large batches - and this not only in thin sheetmetal.
| Technical Data: |
TruLaser 7025 |
TruLaser 7040 |
| Working range: |
X axis: 2500 mm
Y axis: 1250 mm
Z axis: 115 mm (ControlLine)
|
X axis: 2500 mm
Y axis: 4000 mm
Z axis: 115 mm (ControlLine)
|
| Max. sheet thickness: |
20 mm (mild steel)
15 mm (stainless steel)
10 mm (aluminium)
|
| Max. axis speeds: |
300 m/min (simultaneous) |
| TRUMPF CO2 laser: |
TruFlow 3200, TruFlow 3600 |
| Space requirements: |
approx. 8500 mm x 10200 mm |
approx. 16450 mm x 7700 mm |
|
