| |
TruPunch 1000
Quality punching
With the TruPunch 1000, your punching results are just perfect. This new, compact machine is not only easy to operate, but its multi-faceted technical capabilities are astounding. And the best thing about it: The cost-benefit ratio is just right.
| Application |
Punching |
| Category |
Low-cost punching machine for entry-level
punching |
| Working range X x Y |
2070 x 1280 mm (without repositioning) |
| Tools, Linear magazine |
15 with 2 clamps |
| Max. sheet thickness |
max. 6.4 mm |
The new TRUMATIC 1000 ROTATION is based on proven TRUMPF technology and can master everything the larger punching machines can, including three dimensional punching.
Not only can you punch, but you can also form threads, bend flanges and produce extrusions quickly, easily and economically in one machine setup. There are no limits to part diversity.
Thanks to the new and simple programming a type of navigation system which supplements and greatly simplifies ToPs 300 basic, you can program typical parts in no time at all, even if you are a novice.
If you ever need to program more complicated part contours, you are right on target with ToPs 300 basic. ToPs 300 basic is a version of the tried and proven TRUMPF punching software, ToPs 300, that has been perfectly tailored to the requirements of the TRUMATIC 1000 ROTATION.
Both simplified programming and ToPs 300 basic are included in the standard configuration of the machine control.
| Technical Data: |
TruPunch 1000 |
| Working range X x Y |
without repositioning: 2070 x 1280 mm
with repositioning: 2500 x 1280 mm |
| Max. sheet thickness |
6.4 mm |
| Max. punching tonnage |
165 kN |
Max. stroke rate when punching
(E=1 mm) |
600 1/min |
| Max. stroke rate when marking |
1300 1/min |
| Tools, linear magazine |
15 with 2 clamps (option: 3rd clamps) |
| Part removal |
Max. part size for fixed chute: 180 x 150 mm
Max. part size with support table: 460 x 500 mm |
| Space requirements |
6000 x 5825 mm |
|
|
