Shop

TruArc Weld 1000

Quick programming, safe welding

The welding cell is a fully equipped machine tool, tested by the Technical Supervisory Association (TÜV) and certified with CE. This includes an exhaust system, housing with anti-glare protection and safety equipment in line with TRUMPF standards. You can launch, program and operate the welding cell with very little training – video tutorials will do the job. You can utilise the welding cell in one- or two-station operation, depending on the component and lot size. This means, for example, that you can either process a larger component or smaller components in larger batches parallel to production.

Easy to operate and program

Using the operating unit on the welding torch and simple programming directly at the robot control

Safe in line with TRUMPF standards

Safety cabin with anti-glare protection, self-cleaning exhaust system, LED lighting and collaborative robot

Quick set-up and start-up

Set the machine up at the desired location and start operation within just a few hours

Weld productively

Thanks to high-performance equipment from Fronius and set-up parallel to production using two-station operation
SKU: TruWeld1000 Categories: ,

Description

TruArc Weld 1000

AXIS DATA
TYPE Collaborating industrial robot arm
NUMBER OF AXES 6
RANGE 1300 mm
REPETITION ACCURACY +/- 0.05 mm
WELDING SOURCE
TYPE FRONIUS TPS 320i C PULSE
WELDING CURRENT RANGE MIG/MAG 3 A – 320 A
DIMENSIONS AND WEIGHTS
CABIN DIMENSIONS 3605 mm x 2454 mm x 2818 mm
WEIGHT 2940 kg
WORK AREA
TYPICAL MAXIMUM PART SIZE (WITH CLOSED TELESCOPIC CENTRE SEPARATION) 600 mm x 600 mm x 600 mm
TYPICAL MAXIMUM PART SIZE (WITH OPEN TELESCOPIC CENTRE SEPARATION) 2000 mm x 600 mm x 600 mm

 

Programming

Combination of intuitive operating unit on the welding torch and simple programming directly at robot control for minimum programming times. The design of the machine’s central operating unit is simple and clear.

Robot

Collaborative robot UR10e with six axes and force moment sensor. The linear axis positions the robot on the left or right.

Safety cabin

Safety cabin with integrated exhaust system, automatically opening anti-glare protection and lighting. The extendible partition wall divides the work area for two-station operation if required.

Fronius equipment

High-performance welding equipment from Fronius: TPS 320i C PULSE welding source including welding package PMC, ultra-slim 350 ampere torch and external wire feed system.

Demmeler table

3D welding table by Demmeler with hole pattern D16 in a 50 x 50 mm grid and hardened surface. The table’s dimensions are 2000 x 1000 x 100 mm.

Loading by crane

User-friendly loading of heavy and large components and devices is possible with this option. To do so, the cab cover is opened individually over the two stations and the component is loaded into the machine interior by crane.

Technology package – CMT welding

The optional technology package CMT welding ensures higher process reliability and energy-reduced welding with fewer weld spatters and little distortion with the TruArc Weld 1000.

Pendulum welding

Pendulum welding is particularly beneficial for thick sheet processing. You can prevent a lack of fusion with wide weld seams.