Shop

First LC1-1/2 VS

First Model LC1-1/2 VS Variable Speed
Turret Milling Machine with 3HP Motor

Milling Head: Variable Speed
Long. travel: 966 mm
Cross Travel: 305 mm
Vertical travel: 406 mm

SKU: 6.FIRST.C.LC1-1/2VS Categories: ,

Description

SPINDLE UNIT

R8,NST30, NST40 are available.
Made from one piece of Ni-Cr alloy steel.
Supported by two precision angular contact and one ball bearing to ensure rigidity.
Inner taper was hardened and precision grounded.

MILLING HEAD GEAR AND QUILL

Harden and ground spindle, quiet and smooth, free of noise and vibration.
Use dynamically balanced pulleys and precision bearings.
2HP to 3HP spindle motor are available.
Spindle back gear running in grease packed housing ensure fatigue strength and low noise.
Chrome coated and mirror ground finished quill.

RIGID HEAD TILTING SYSTEM

The heaf knuckle is our design patent. This structure greatly increase the stability and rigidity, when vertical head titled at all angles, front and back to perform complicated work. There are 6 T-bolts to lock the knuckle to the Ram instead of 3 bolts.

ADJUSTABLE BACKLASH NUT

Unique double nuts and backlash adjusting design, contact face enlarged ensuring accuracy over term and easy for backlash adjustment.

Included:

  • CE Mark
  • Low Voltage Control System
  • 1270 x 230 mm Table
  • 3 HP Motor
  • X axis table power feed
  • Chromed bedways
  • Coolant system
  • Coolant tray
  • Low voltage control system
  • Halogen light
  • ES-3 3 Axis Digital Readout
  • Interlocked Chuck Guard
  • Crossway Cover
  • One Shot Lubrication
  • Spindle Brake Motor
  • Air Powered Drawbar

Technical Data:

  • Table working surface: 1270 x 230 mm
  • T-slots: 3 x 16 mm
  • Quill swivel: R & L 90 deg.
  • Quill swivel: F&B 45 deg.
  • Overarm travel: 305 mm
  • Overarm swivel: 360 deg.
  • Spindle nose to working surface: 0 – 469 mm
  • Spindle centerline to column: 171 – 476
  • Spindle taper: R8
  • Motor: 3 HP
  • Spindle speeds: 50 – 3,750 rpm
  • Vertical feeds: 0.04/0.08/0.16 mm/rev
  • Quill travel: 127 mm
  • Quill dia.: 85.7 mm
  • Dimensions: H2100 x L1467 x W1600 mm
  • Weight: 1010 kg

 

MODEL LC-1 1/2 VS
Travel
Longitudinal Travel 762 mm (30″) / Opt: 966 mm (38″)
Cross travel 305 mm (12″)
Vertical travel 406 mm (16″)
Table
Working surface 1,067 mm X 230 mm (42″ X 9″) / Opt: 1,270mm (50″)
Working surface to ground A01 820 ~ 1,226 mm (32.3 ~ 48.3″)
Max. load 200 Kg
T-slots (no. x width x pitch) 3 X 15.875 mm X 63.5 mm (3 X 0.625″ X 2.5″)
Machine size
Length A02 1,600 ~1,905 mm (63 ~ 75″)
Width A03 1,467 mm (57.8″)
Height A04 2,100 mm (82.7″)
Weight 1,010 kgs (2,222 lbs)
Coolant pump O
Vertical spindle
Milling head VS
Quill swivel (R&L/90°) B01 V
Quill swivel (F&B) B02 +45° ~ -38°
Spindle nose to working surface B03 0 ~ 469 mm (0 ~ 18.5″)
Spindle centerline to column B04 171~ 476 mm (6.75″~18.75″)
Overarm travel B05 305 mm (12″)
Overarm swivel 360°
VS Head
Milling head specification
Milling Head VS
Spindle Taper R8 or NST 30
Spindle Motor(3Ph) 2 HP
Quill Diameter 85.7 mm
Quill Travel 127 mm (5 “)
Vertical Feeds 0.04/0.08/0.16 mm
Spindle Speed 50 HZ 50~3,750 rpm (Variable)
60 HZ 60~4,500 rpm (Variable)
Inverter (Option) O
Bigger spindle motor (Option) 3 HP
Single phase motor (Option) O
2 speed motor (Option) X

Related products